PHS - 2 STAGE HAND PUMPS
The REHOBOT 2-stage PHS hand pump comes with a pressure gauge as standard. This gives the user a precise and safe control over the work car-ried out. The gauge is directly mounted onto the pump and well protected by the specially designed pump lever. The 2-stage function makes the pump simple to operate permitting the cylinder or hydraulic tool to reach its work-ing position much faster compared with 1-stage pumps.
• Hydraulic return connection on all pumps
• Robust aluminium tank with low weight and simple filling of oil
• Needle release valve - offers full control and precision when releasing the hydraulic pressure
• Mounting holes for fixed installations
PHS70-1000/LS201 - The pump PHS70-1000 is also available fully assembled with a 2 m long hose (LS201ES) includ-ing a quick coupling AQI7 and swivel ASE10.
Name
Part
Working
Eff. oil
Capacity
Pump
Pressure
Length
Width
Height
Weight
number
pressure
volume
cm³/stroke
force
gauge
MPa
cm³
High-pressure Low-pressure
N
Type
mm
kg
PHS70-300
44411
70
300
1
20
350
AMT801
320
110
170
6
PHS70-1000
44400
1000
2
620
8.1
PHS70-2400
44405
2400
9.9
PHS70-4000
44875
4000
185
13.7
PHS80-300
44412
80
400
PHS80-1000
44401
360
PHS80-2400
44406
PHS80-4000
44876
PHS100-1000
44402
100
230
TX104
8.3
PHS100-2400
44407
10.1
PHS150-1000
44403
150
370
PHS150-2400
44408
PHS150-1000L
44899
AMT151
8.5
PHS150-2400L
44903
10.3
PHS240-2400L*)
44910
240
0.7
460
AMT301
*) Ultra high working pressure! Be careful selecting the accessories for this pump. All components needs to be design for ultra high pressures. The hydraulic connection interface on PHS240-2400L is constituted by a 9/16” - 18 threaded port with 60º Internal cone.
Note: The hydraulic pressure & return connection interface on all other PHS-pumps is constituted by two G1/4” threaded ports.
Technical tip: We recommend using a Swivel coupling (ASE10) or a female Quick coupling (AQI7) together with coupling nipple (AAU436) & sealing (part number 17009) when attaching hydraulic hoses to the PHS - hand pump series.
PRESSURE GAUGE
All pumps in the PHS-series comes with a pressure gauge as standard. Different units for the representation of pressure or load can be offered.
PRESSURE VALVES
Each PHS-pump in the pressure range of 70-80 MPa can be equipped with a directional valve. This enable operation
of double acting cylinders or hydraulic tools.